Moxa Technologies NE-4100 Series User Manual

NE-4100 Series User’s Manual Web Console Configuration
6-2
Opening Your Browser
1. Open your browser with the cookie function enabled. (To enable your browser for cookies,
right click on your desktop Internet Explorer icon, select Properties, click on the Security tab,
and then select the three Enable options as shown in the figure below.)
2. Type 192.168.127.254 in the Address box (use the correct IP address if different from the
default), and then press Enter.
ATTENTION
If you use other web browsers, remember to enable the functions to “allow cookies that are
stored on your computer” or “allow per-session cookies.”
NE-4100 Series modules only use cookies for password transmission.
ATTENTION
Please refer to Chapter 5, Initial IP Address Configuration for instructions on IP configuration.
The examples in this chapter use the factory default IP address (192.168.127.254).
3. The web console will open. On this page, you can see a brief description of the web console’s
eleven function groups.
NOTE: “Serial Command Mode” is supported in firmware version 3.0 and above.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx

Moxa Technologies NE-4100 Series Specifications

General

Brand	Moxa Technologies
Model	NE-4100 Series
Category	Control Unit
Language	English