NE-4100 Series User’s Manual Network Enabler Administrator
7-15
Advanced Settings
In the Advanced Settings tab, you may enable an alarm to warn you of monitor events. You may
choose an audible alarm as well as a pop-up warning message.
Go and Stop
Go and Stop are used to activate and deactivate monitoring of the modules in the module list.
Monitoring is not active until Go has been selected in the Monitor context menu. Note that this
menu may also be opened by right-clicking Monitor in the navigation panel or by right-clicking
the desired module.
The list in the monitor window will now be live, and the selected items will be refreshed as
configured.
To Next Page
Loading...