ATTENTION
Always select and submit the time zone before modifying the time. The console will display the
real time according to the time zone compared to GMT.
If you would like to modify the real time clock, select Local Time. The module’s firmware will
modify the GMT time according to the Time Zone.
Time zone
Setting Factory Default Necessity
User selectable time zone GMT (Greenwich Mean Time) Optional
Local time
Setting Factory Default Necessity
User adjustable time. GMT (Greenwich Mean Time) Optional
Click on the Modify button to open the Modify time settings window to input the correct local
time.
Time server
Setting Factory Default Necessity
IP or domain address
(E.g., 192.168.1.1, time.stdtime.gov.tw, or
time.nist.gov)
Non
e Optional
NE-4100 Series modules use SNTP (RFC-1769) for auto time calibration.
Enter the Time Server IP address or domain address. When the Time Server IP address is provided,
the module will request time information from the Time Server every 10 minutes.
Console
Web console, Telnet console
Setting Factory Default Necessity
Enable or Disable Enable Required
The web console and Telnet console can be disabled for security reasons. In some cases, you may
want to disable one or both of these console utilities as an extra precaution to prevent unauthorized
users from accessing the module. The factory default for both web console and Telnet console is
Enable.
To Next Page
Loading...
Need help?
General