NPort Server User’s Manual
5-6
2. Click ‘Next’ to continue. For first-time installer, you will jump to next step
directly. If the server being set with password, you will see a password
protected screen. If you are a server administrator, select ‘ Yes’ and enter the
password. However if you’ re NOT the administrator, select ‘ No’ and continue
to install ports.
. Note: If you’re not the administrator, be sure to ask the administrator to add you to
the access control list of the server.
3. Confirm if the IP address suggested is the one you need. Or, you may key in a
dedicated one assigned by your LAN administrator.
. Note: If you have DHCP server at local network, be sure to consult with the DHCP
administrator to assign dedicated IP addresses to the server and your
computers connecting to the server.
To Next Page
Loading...
