MSA SUPREMATouch - 9 Description of the System; Structure of the System (Module Descriptions)

MSA AUER
MSA
Description of the System
SUPREMATouch
113
US
9 Description of the System
9.1 Structure of the System (module descriptions)
The modular control system contains two different types of modules. Each type is equipped with
a microcomputer and is connected to the CAN bus.
Modules with complex tasks and multitasking:
Modules with simple tasks and multitasking:
• MCP Module CENTRAL PROCESSING Module
(system control and signal processing)
• MDO Module DISPLAY + OPERATION Module
(system status display + operation)
• MDA Module DATA ACQUISITION Module
(measurement signal input + preliminary processing)
• MGO Module GENERAL OUTPUT Module
(driver outputs for system messages)
• MAO Module ANALOG OUTPUT Module
(0 ... 20 mA outputs)
• MBC20-AdvEI Module BUS COMMUNICATION Module
(for use only with Advanced Electronics Fire Panel)
• MRO Module RELAY OUTPUT Module
(different models, 8/16 relays)