MSA SUPREMATouch - Sensors Which Can be Connected to the Unit

MSA AUER
MSA
Safety Regulations
SUPREMATouch
11
US
This exclusion is applicable to claims for breach of warranty, tortious conduct or any other
cause of action against seller.
1.3 Sensors Which Can Be Connected to the Unit
The following types of active and passive MSA sensors can be connected to the
SUPREMATouch system:
[EX: Explosive gases or vapours; TOX: Toxic gases; OX: Oxygen; Fire Detection: Smoldering Fire
Detection; Flame: Flame Detector]
NOTE: Other types of sensors may be operated in conjunction with the SUPREMATouch only af-
ter consulting with MSA.
Designation
Module
Type
Measuring
Principle
Use Active Passive
Series 47K MPI-
WT100
catalytic EX X
Ultima X MCI various EX X
FlameGard MCI infrared Flame X
PrimaX MCI various EX/TOX/OX X
PrimaXIR MCI infrared EX X
FlameGard 5 MSIR MCI infrared Flame X
FlameGard 5 UV/IR MCI infrared/ultraviolet Flame X
FlameGard 5 UV/IR-E MCI infrared/ultraviolet Flame X
Ultima MOS-5 MCI semiconductor H
2
SX
Ultima MOS-5E MCI semiconductor H
2
SX
Ultima OPIR-5 MCI infrared EX X
UltraSonic EX-5 MCI acoustic leakage X
UltraSonic IS-5 MCI acoustic leakage X
MAC MFI
Smoke MFI
Fire MFI
Switch MSI