Contents
SUPREMATouch
3
US
Contents
1 Safety Regulations .................................................................................................................... 9
1.1 Correct Use ....................................................................................................................... 9
1.2 Product Warranty............................................................................................................. 10
1.3 Sensors Which Can Be Connected to the Unit................................................................ 11
1.4 Software Status ............................................................................................................... 12
2 System Concept ....................................................................................................................... 13
2.1 Features of the System ................................................................................................... 13
2.2 Construction of the Unit................................................................................................... 15
2.3 Safety Concept ............................................................................................................... 17
3 Operation of the System ......................................................................................................... 18
3.1 Operation......................................................................................................................... 18
3.2 Operation and Display unit MDO..................................................................................... 18
3.3 Operation Menu .............................................................................................................. 23
3.4 PC Operation................................................................................................................... 70
4 Special conditions to comply with the requirements of IEC 61508 ................................... 71
4.1 Conditions for configuration, installation, operation and maintenance ............................ 71
4.2 Listing of the permitted Hardware Modules and Software Versions................................ 76
4.3 TUEV-Certificate.............................................................................................................. 79
5 Modules tested according to DMT 03 ATEX G 003 X ........................................................... 80
6 Maintenance and Service ....................................................................................................... 81
6.1 Maintenance and Adjustment ......................................................................................... 81
6.2 Sensor Simulation Modules............................................................................................. 86
6.3 Replacement of Sensors ................................................................................................. 88
6.4 Replacement of Modules................................................................................................. 89
6.5 Changing the Password .................................................................................................. 91
6.6 Plug-In Modules– Status LED ......................................................................................... 92
6.7 Diagnostic Functions ....................................................................................................... 93
6.8 System Failure Messages ............................................................................................... 97
6.9 ID Rack Assignment in decimal and hexadecimal figures............................................... 99
6.10 Display of Digital Messages .......................................................................................... 100
6.11 LED and Sounder Test.................................................................................................. 100
6.12 Instructions for system configuration............................................................................. 101
7 System Expansions .............................................................................................................. 105
7.1 Connection of Additional Sensors ................................................................................. 105
7.2 Connection of Additional Relay Driver Outputs ............................................................. 106
7.3 Connection of Additional Analogue Outputs.................................................................. 107
To Next Page
Loading...
