MSA SUPREMATouch - 2 System Concept; Features of the System

MSA AUER
MSA
System Concept
SUPREMATouch
13
US
2 System Concept
2.1 Features of the System
- Modular system.
- Compact construction.
- High flexibility.
- 19” rack system for the connection of up to 256 sensors.
- NEMA 4 wall mount cabinet
- Complete system for up to 64 sensors with common alarm in one 19” rack.
- Maximum number of switching outputs in the system: 512.
- Minimal installation work [bus system].
- Redundancy possible
- Maximum refresh rate of 3-4 seconds for alarm outputs [1-2 s for data acquisition; 1 s for com-
putation; 1 s for data output]
- Maximum refresh rate of 3-5 seconds for signal fail outputs [1-2 s for data acquisition; 1-2 s for
computation; 1 s for data output]
- Maximum response time of 15 seconds for system fails
- External voltage operation [85 ... 265 VAC] no switching necessary.
- Power supply unit on the rack, 150 W.
- For higher power requirements, external power supplies can be connected.
- Battery connection for emergency power operation.
- Operating voltage range of the system modules: 19.2 VDC ... 32 VDC.
Recommended voltage: 24 VDC.
- Card coding is no longer necessary.
- Operation of active sensors with 4 ... 20 mA output, 2- or 3-wire.
- System operation via a graphical touch screen with a resolution of 320 x 240 pixels and indi-
vidual function keys.