SUPREMATouch
14
System Concept
MSA
US
- Self-explanatory error messages
- System operation optionally via laptop [Windows user interface].
- PC can be connected to tie the system into the company communications network [data eval-
uation, data display, etc.]
- Key switch connection or 3-level password for access control.
- Key switch connection for relay inhibiting.
- Common alarm LEDs for 1st to 4th alarm, signal failure [sensor], horn, inhibit, power supply
failure.
- Protocol printout of status changes + system operations [standard ASCII, 80 CHR].
- 1 x USB + 1 x RS232 or 2 x RS 232 interfaces for data transfer to an industrial PC/laptop/print-
er.
- RS 232 interfaces are electrically isolated.
- RS 232/RS 485 converters used for longer transmission distances.
- The 8 MRO Module common alarm relays supplied by the rack power supply unit.
- External relays are supplied with power separately.
To Next Page
Loading...
