Operation of the System
SUPREMATouch
55
US
Time interval
Field type: Selection
The time interval/repetition rate of the alive-message [never, annually, monthly, daily, …, every
second etc.] can be set here.
Base time
Field type: Date/time input
The base time for the alive-message can be set here.
OK
Field type: Button
By tapping this button, the completed settings are applied.
Cancel
Field type: Button
By tapping this button, the completed settings are discarded.
Available tags:
Tag Printout
%% %
%DD day [length = 2]
%DM month [length = 2]
%DY year [length = 2]
%TH hour [length = 2]
%TM minute [length = 2]
%TS second [length = 2]
%A1 ’S’ if alarm 1 was set, ’R’ if alarm 1 was reset
%A2 ’S’ if alarm 2 was set, ’R’ if alarm 2 was reset
%A3 ’S’ if alarm 3 was set, ’R’ if alarm 3 was reset
%A4 ’S’ if alarm 4 was set, ’R’ if alarm 4 was reset
%SF ’S’ if signal fail was set, ’R’ if signal fail was reset
%MP ’MP’ and the Measuring point number [length = 5]
%MD Measuring dimension [length = 5]
%MG Measuring gas [length = 14]
%MT Measuring tag [length = 11]
%ML Measuring place [length = 21]
%MM Measuring marking [length = 21]
%MS Measuring serial number [length = 11]
%MV Measuring value [length = 6]
To Next Page
Loading...
