MST AXON User Manual

65
©
2019 MST Global Commercial in Confidence
A
XON Digital Plat
f
orm
User Manual
Revision A
To configure the wireless radio:
1. Select the Enable Wireless Radio check box to enable wireless.
2. To change wireless radio settings, edit the required fields. A description and recommended
settings are shown below.
3. Click Save Settings.
Field Description
R
ecommended Settings
Enable Wireless
Radio
Used to enable or disable the WAC's radio.
Region
Limits available channels to those allowed
by local regulations
Select the correct region for the site
location.
Transmission Rate Settings to configure how fast data is
transmitted.
Leave the default setting as Best
(automatic) for data transmission at
the best possible speed.
802.11 Mode
A
drop-down box to select the 802.11 mode
f
r
om mixed 802.11g and 802.11b to 802.11g.
If there are 802.11b wireless client
devices, leave the setting at Mixed.
Select 802.11g for improved
performance if all wireless client
devices are 802.11g capable.
Super AG Mode See section below. See section below.
Transmit Power
Used to control the power delivered via the
w
ireless transmitter.
High - Only drop to Medium or Low if
the signal is interfering with other
devices.
Transmit Antenna Defines the antenna to be used for
transmission of wireless frames. The options
are:
Main: The MAIN antenna will always be used
fo
r
transmission.
A
ux: The AUX antenna will always be used
fo
r
transmission.
Diversity: The radio will determine the best
antenna to use for transmission based on
the signal strength of recently received
f
r
ames from both antennas.
Main

MST AXON Specifications

General

Brand	MST
Model	AXON
Category	Switch
Language	English