MST AXON - Editing Site Configuration Files

84
©
2019 MST Global Commercial in Confidence
A
XON Digital Plat
f
orm
User Manual
Revision A
Figure 39: Centralised configuration management
8.2.1 Editing Site Configuration Files
Site configuration files contain common settings for all devices in a network. The site configuration file
has the naming convention ap_site_settings.conf. This file is retrieved by devices using TFTP.
NOTE: The same site configuration file can be used to configure network switch
units and WAPs in a network. When the site configuration file is applied to WAPs, all
switch port settings are ignored by the WAP.
The site configuration file can be opened on a PC and edited using a text editor. Parameters are
changed by modifying the text and saving the file. A description of the editable parameters are covered
in the following sections.