MST AXON - Appendix E: Connecting a PC to an Network Device

105
©
2019 MST Global Commercial in Confidence
AXON Digital Platform
User Manual
Revision A
Appendix E: Connecting a PC to an Network Device
1. This Appendix specifies how to set up a PC connection (with Windows XP operating system)
to connect to an AXON Core or AXON AIR.
2. Connect a PC to the device's Ethernet port with an Ethernet cable. If the PC is already part
of the network, note its TCP/IP configuration settings.
3. Click Start > Control Panel. Open Network Connections.
Right-click Local Area Connection and select Properties. The Local Area Connection Properties
window will open