MST AXON User Manual

88
©
2019 MST Global Commercial in Confidence
A
XON Digital Plat
f
orm
User Manual
Revision A
NTP (Network Time Protocol)
The Time section shown below defines NTP (Network Time Protocol) server settings for the network
switch.
Field Description
time.ntp.enabled
0
: Disabled
1
: Enabled - device will synchronise time with an NTP server (requires
network or internet access to an NTP server).
time.ntp.server1 Hostname or IP address of NTP server. For example
time.windows.net.
Logging
System message logging settings.
Field Description
syslog.enabled
0
: Disabled
1
: Enabled
syslog.server_address The hostname or IP address of the syslog server
syslog.level
A
ll messages from 0 to the selected number will be logged.
0
: Emergency
1
: Alert
2
: Critical
3
: Error
4
: Warning
5
: Notice
6
: Informational
7
: Debug
SNMP
Simple Network Management Protocol settings. At present, the ICA only uses this protocol to monitor for
Port Up/Port Down errors on AXON Core, and is not affected by the settings below, adjust only if required
for 3rd party monitoring software.
Field Description
snmp.enabled
0
: Disabled
1
: Enabled

MST AXON Specifications

General

Brand	MST
Model	AXON
Category	Switch
Language	English