7.11 Oil Filtration / Cooling
7.11.1 Engine oil filter – Replacement
Preconditions
☑Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Filter wrench
F30379104 1
Engine oil
Oil filter
(→ Spare Parts Catalog)
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Engine oil filter – Replacement
1. Remove oil filter (2) with filter wrench.
2. Clean sealing face on connecting piece (1).
3. Check sealing ring (arrow) of new oil filter
and moisten with oil.
4. Screw on and tighten oil filter by hand.
5. Replace other oil filters in the same way.
6. After each oil change and filter replace-
ment, crank engine with starting equip-
ment (→ Page 69).
7. Check oil level (→ Page 99).
MS150118/00E 2014-07 | Task Description | 101
TIM-ID: 0000053456 - 001
To Next Page
Loading...
