Consumption
Number of cylinders 16
Lube oil consumption after 100 hrs runtime (B = hourly fuel consumption) % of B 0.8
Table 96: Consumption
Model-related data (basic design)
Number of cylinders 16
Operating method: four-stroke cycle, diesel, single-action X
Combustion method: direct fuel injection X
Number of cylinders 12
Cylinder arrangement: Vee angle Degrees (°) 90
Bore mm 135
Stroke mm 156
Displacement of a cylinder Liters 2.233
Total displacement Liters 35.7
Compression ratio 17.5
Standard housing connecting flange (engine main PTO side) SAE 0
Table 97: Model-related data (basic design)
Air / exhaust gas
Number of cylinders 16
Charge-air pressure before cylinder - DL R bar abs 3.4
Charge-air pressure before cylinder - BL R bar abs 3.5
Table 98: Air / exhaust gas
Coolant system (HT circuit)
Number of cylinders 16
Coolant temperature (at engine connection: outlet to cooling system) A °C 100
Coolant temperature after engine, warning L °C 102
Coolant temperature after engine, shutdown L °C 105
Coolant antifreeze content, max. L % 50
Cooling system: coolant flow rate A m³/h 41.6
Coolant pump: inlet pressure, min. L bar 0.4
Coolant pump: inlet pressure, max. L bar 1.5
Pressure loss in external cooling system outside engine L bar 1.0
Breather valve (expansion tank) opening pressure at gauge pressure R bar 1.0
Cooling system: height above engine, max. L m 20
Table 99: Coolant system (HT circuit)
MS150118/00E 2014-07 | Technical Data | 51
TIM-ID: 0000053444 - 001
To Next Page
Loading...
Need help?
General