To Next Page

To Previous Page

Fault

code

Alarm text Meaning Task

016 L2 P-LUBE OIL Lube-oil pressure too low (2nd

limit)

automatic engine shutdown

1. Check engine-oil level and top up, if re-

quired (→ Page 192);

2. Try to re-start the engine (→ Page 114).

3. Contact Service.

023 L1 COOLANT LEV-

Engine coolant level too low Check coolant level and top up, if required

(→ Page 205) .

024 L2 COOLANT LEV-

Engine coolant level too low Check coolant level and top up, if required

(→ Page 205).

030 ENGINE OVER-

SPEED

Engine overspeed; automatic

engine shutdown

1. Acknowledge alarm.

2. Try to re-start the engine (→ Page 114).

3. Contact Service.

033 L1 P-FUELFILTER

DIFF

Differential pressure before/

after fuel filter too high

Replace fuel filter (→ Page 172).

051 L1 T-LUBE OIL Lube-oil temperature too high

(1st limit)

Reduce power.

052 L2 T-LUBE OIL Lube-oil temperature too high

(2nd limit)

1. Reduce power.

2. If fault occurs repeatedly: Contact

Service.

067 L1 T-COOLANT Coolant temperature too high

(1st limit) warning

Reduce power.

068 L2 T-COOLANT Coolant temperature too high

(2nd limit)

automatic engine shutdown

1. Allow the engine to cool down.

2. Check coolant cooler (elements etc.)

and clean contaminated parts (see

manufacturer's documentation).

3. Re-start the engine (→ Page 114).

4. If fault occurs repeatedly: Contact

Service.

069 L1 T-EXTERN 1 Violation of first limit for exter-

nal temperature channel 1

(Depending on the corresponding measur-