EasyManua.ls Logo

Multitech MultiModem iSMS SF 100-G - Page 29

Multitech MultiModem iSMS SF 100-G
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Using the Web Interface
Multi-Tech Systems, Inc. MultiModem® iSMS User Guide for Administrators 29
Administration > System Setup
E-Mail Notification
SMTP Server
Enter the IP address or the resolvable name (e.g. smtp.yourdomain.com) of your mail server.
Port
Enter the port number on which the mail server listens. Example: 25. Click the Save button.
SMTP Server Authentication
Some mail servers accept connection only after a user name and password are authenticated. If
your server requires this, check the SMTP Server Authentication box. Then enter the User Name
and Password in the next fields.
User Name
If your mail server accepts connection only after a user name and password are authenticated,
enter the user name.
Password
If your mail server accepts connection only after a user name and password are authenticated,
enter the password. Click the Save button.
E-Mail Address
Enter the e-mail addresses of the individuals to whom notifications regarding the log file being full,
an invalid Telnet login, or an invalid Web login should be sent. In addition, the administrator may
want use their office e-mail address, home e-mail address, etc. Enter the addresses in proper
user@domain format. Click the Save button after each entry. An address can be deleted or
changed at any time.
Note that at least one e-mail address must be entered in this field.
Configure E-Mail Notification
Select the types of notifications that you want sent to individuals listed above. Click the Add
button. Each entry will then move to the Send E-Mail Notification For box. A notification can be
removed by clicking the Delete button. The entry will then move back to the Don't Send E-Mail
Notification For box.
The following are defaulted for Don't Send E-Mail Notification:
1. Log File Full
2. Invalid Telnet Login
3. Invalid Web Login
Administrator E-Mail ID
Enter the administrator's e-mail identification. This is the name/address that will display in the
FROM line of the notification emails. This will allow the recipients of the notifications to direct
questions or comments to the administrator. Enter the email ID in proper user@domain format.
Click the Save button. The address can be deleted or changed at any time.
A Note about E-Mail Notification
E-Mail notification is delivered through the Ethernet network, not through the wireless cellular
connection.
Downloaded from Elcodis.com electronic components distributor

Table of Contents

Related product manuals