Multi-Tech Systems, Inc. MultiModem® iSMS User Guide for Administrators 28
Chapter 4 – Using the MultiModem iSMS
Web Interface
Now that you have completed the Wizard Setup, you can use the Web-based configuration and management
interface to set up other SMS features and parameters. This chapter takes you screen-by-screen through the
Web Interface.
Note: The antenna must be attached in order for the MultiModem iSMS to be operational.
IMPORTANT Note About Saving your Settings to Flash Memory
When you have completed your MultiModem iSMS settings, you must go to the Save & Restart menu
located at the top of the window under the menu bar. Then click the Save to Flash save button. This will
save all your system settings to flash memory and prevent them from being lost after a system restart.
Administration
Administration > System Setup
On the System Setup screen, you can set up the e-mail address of the administrator to whom e-mails are
sent for event notification. The e-mail address must be entered in proper "user@domain" format.
A Note About E-Mail Notification
E-Mail notification is delivered through the Ethernet network with an Internet connection, not through the
wireless cellular connection.
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
