Appendix A – Application Programming Interface (API)
Multi-Tech Systems, Inc. MultiModem® iSMS User Guide for Administrators 84
• text The trigger message text to be sent.
Enable Extended ASCII in the MultiModem iSMS to send both ASCII and extended
ASCII characters.
By default, Extended ASCII is disabled, and the message can have only ASCII
characters.
If Unicode is enabled (and if enc is not specified in request), SMS text should be
only in Hexadecimal form.
If Extended ASCII is disabled, a maximum of 160 characters can be sent.
If Extended ASCII is enabled, a maximum of 140 characters can be sent.
If Unicode is enabled, a maximum of 70 characters can be sent.
Irrespective of the spanned SMS value set, the maximum number of characters
allowed in the text field is:
160 for ASCII
140 for Extended ASCII
70 for Unicode
Any characters entered beyond the allowed limit will be chopped off.
The API can be used to send a trigger message to the MultiModem iSMS. If the
MultiModem iSMS has a configured broadcast trigger, it will send the broadcast
trigger message to the configured recipients.
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
