3-82 Specifying Default Machine Settings
Specifying Default Machine Settings
You can set the default values for each function, the ready screen, and the energy save
mode.
The default values are those used when you press <Reset> to return to the ready screen.
Changing the default values of often-used functions can shorten the time required to
adjust settings.
Settings
You can set the default settings for the copy, scanner, e-mail, fax, and printer functions.
Click [Admin Login] in OfficeBridge, and log in.
1
(See page 2-7.)
This function may also be available on Guest and User login screen, depending on user policy
settings.
Click [Machine Settings], and then [Machine Default Settings].
2
Click the function you want to specify the default settings for.
3
Specify the default settings.
4
Click [Save].
5
The display returns to the “Machine Default Settings” list screen.•
Press [Back] to cancel registering the default settings for the copy function and return to the •
“Machine Default Settings” list screen.
Regarding Settings
Refer to the other manuals for details on the settings for each function.
Function Reference manual and chapter
Copy Settings Chapter 3, “Device Settings” in the Copier Guide
Scanner Settings Chapter 7, “Specifying Default Settings” in the Scanner and Fax Guide
E-mail Settings Chapter 7, “Specifying Default Settings” in the Scanner and Fax Guide
Fax Settings Chapter 7, “Specifying Default Settings” in the Scanner and Fax Guide
Printer Settings
Chapter 9,
“
Setting the Print Controller
”
and
“
Setting the Auto Deletion Time
for Security Printing
”
in the Printer Guide.
To Next Page
Loading...
Need help?
General
