ScanTag Settings
You can register ScanTag settings. Up to 20 can be registered.
Click [Admin Login] in OfficeBridge, and log in.
1
(See page 2-7.)
This function may also be available on Guest and User login screen, depending on user policy
settings.
Click [Machine Management Settings], and then [ScanTag Settings].
2
The “ScanTag Settings” list screen is displayed.
Click [Add].
3
Specify the detailed ScanTag settings.
4
You can register the following items.
Setting Description Settings
Number The smallest free number is automatically entered.
You can change it to a number of your choice.
01-20
Setting Set to whether to enable or disable the ScanTag
setting.
ON: Enable
OFF: Disable
Setting
Name
Enter the name of the ScanTag setting. 40 characters
Login Setting If you perform a login when using ScanTag,
information for the logged in user is included in the
ScanTag output file.
If you set “ON”, the login screen is displayed when
using ScanTag.
ON
OFF
Tag Setting By clicking [Tag Setting] in the “ScanTag
Configuration” screen, a new window opens to
display the “Tag Setting Registration” screen.
−
To Next Page
Loading...
Need help?
General
