MUTOH SC-650 - Diagnost 4: Toolset and Paper Tests; Diagnost 5: Time and Distance

Maintenance Manual – SC Cutting Plotter
40 AP-74030, Rev / B
5.3.4. Diagnost. 4
1) Toolset
F1
* Diagnost-4 *
TOOLSET Paper F2
Press F1
F3
* Select TOOL *
< Pen1 >
Press ENTER/EXIT
F4
This diagnostic allows you to change from tool to pen or the reserve by pressing F3/F4.
2) Paper.
This test / adjustment is of no importance.
5.3.5. Diagnost. 5
1) Time and Distance.
F1
F3
* Diagnost – 5 *
TIME DISTANCE
XY-move General
F2
F4
(F1) TIME displays the actual working time of the machine.
(F2) DISTANCE displays the actual distance that the machine has been cut.