NAPCO x255 - Page 68

X GEM-X255 Programming Instructions
L NAPCO Security Systems

Page 68
WI1092E 10/05
ADDRESS NUMBER INDEX (CONT'D)
ADDRESS NAME PAGE
1027 Disable Wait For Handshake 25
1027 Disable Wait For Silence 25
1027 Handshake For Local Telemetry 25
1027 Touch-Tone Dialing only 25
1027 Touch-Tone Dialing W/Rotary Backup 25
1027 Transmit “402” Opening/Closing Code 25
1030-1080 CS USER REPORTING CODES 27
1082-1116 GLOBAL SYSTEM TROUBLE Reporting OPTIONS 28
1120-1157 AREA SYSTEM TROUBLE REPORTING OPTIONS 29
1160-1197 AREA SYSTEM TROUBLE REPORTING OPTIONS 30
1200-1386 ZONE OPTIONS / ZONES 1-16 31
1402-1586 ZONE OPTIONS / ZONES 17-32 32
1602-1786 ZONE OPTIONS / ZONES 33-48 33
1802-1986 ZONE OPTIONS / ZONES 49-64 34
2002-2186 ZONE OPTIONS / ZONES 65-80 35
2202-2386 ZONE OPTIONS / ZONES 81-96 36
2400 Reset Output Timeout 20
2401 Aux. Output Timeout 20
2402 Aux. Output Access Control Timeout 19
2403 Burg. Alarm Output Timeout 20
2404 Pulse Alarm Output Timeout 20
2405 Fire Output Timeout 20
2406 ABORT DELAY 19
2407 CHIME TIMEOUT 19
2408 AC Fail Report Delay 19
2414 Telephone Line Test Delay 19
2415 Disable Fire Reset 38
2415-2419 SYSTEM OPTIONS 38
2416 Enable Day Zone Watch 38
2417 Enable All-Zone-in-Trouble Bypass 38
2417 Closing Report only on Cond. Closing (Auto-Byp.) 38
2417 Disable Auto-Unbypass on Disarming 38
2417 Include Sel./Grp. Bypass In Cond. Closing Status 38
2417 Lug E4 Armed Away only 38
2417 Opening Report only After Alarm Report 38
2417 Status Report (Auto-Byp. Zones on Clos.) 38
2418 Access Control (Panel) on Aux. Output 38
2418 Auto Bell Test on Arming 38
2418 Auto Reset After Burg. Output Timeout 38
2418 Enable Burg. Output Warning on Entry 38