Chapter 3: Setup 3-9
Disabled
Primary
Secondary
Both
Local Bus Adapter
This option is used to enable the integrated local bus IDE adapter.
1. Move the cursor to the Local Bus IDE Adapter option.
2. Press Enter and then select the desired setting from the drop-down
menu.
Serial Port x
This option is used to configure the serial ports (A/B).
1. Move the cursor to the Serial port x: option.
2. Press Enter and then select the desired setting from the drop-down
menu.
• Disabled – no configuration
• Enabled – user configuration
• Auto – BIOS or OS chooses configuration
• OS Controlled – (displayed when controlled by OS)
Disabled
Enabled
Auto
To Next Page
Loading...
