Chapter 3: Setup 3-51
Default Primary Video Adapter
This selects the type of video card used for the boot display device.
1. Move the cursor to the Default Primary Video Adapter option.
2. Press Enter and then select the desired setting from the drop-down
menu.
PCI – use installed PCI card for the boot display device
• AGP – use installed AGP card for the boot display device
PCI/PNP UMB Resource Exclusion
This option reserves specific upper memory blocks for use by legacy
ISA devices.
1. Move the cursor to the PCI/PNP UMB Resource Exclusion option and
press Enter.
2. Move the cursor to select the desired upper memory blocks.
3. Press Enter and select the desired setting from the drop-down
menu.
• Available – permits the selected upper memory blocks to be
used by devices other than a legacy device
• Reserved – reserves the selected upper memory block for use
by a legacy device
PCI
AGP
Available
Reserved
To Next Page
Loading...
