B-26 Appendix B: Feature Kits
4. Connect the printer drop cable between the other serial modem and
the printer, securing all connections with the thumbscrews.
5. Set the switches on both modems to DTE, Printer, and CTRL.
Usage Restrictions
• The short modems must be used with the appropriate NCR cables.
− 7194 Printer (497-0411815)
− 7454 Terminal (497-0411815)
• The modems can not be used with a standard OS printer driver that
does not support DTR/DSR flow control such as “generic text
driver.”
• The modems cannot be used with software that utilizes the CTS
signal.
• Use only with OPOS 1.4 or later versions.
To Next Page
Loading...
