NCR 7454 - Page 239

Index
—A—
Advanced power management, 1-20
Audio, 1-13
Auto-Logon
Setting, 2-26
—B—
BIOS crisis recovery, 5-5
BIOS default CMOS values, 3-26
BIOS Recovery
crisis recovery procedures, 5-5
using CD-ROM, 5-1
BIOS values
Celeron processor, 3-26, 3-62
Pentium III processor, 3-62
—C—
Cash drawer
Installation, 2-20, 2-21
CD-ROM drive, B-12
CMOS values
Celeron processor, 3-26, 3-62
Pentium III processor, 3-62
Configuration diagram, 1-7
Customer Display (4x20), 6-1
Character sets, 6-3
Command descriptions, 6-6
Diagnostics, 6-2
Customer Display Command
Descriptions
Brightness Adjustment, 6-15
Disable Character Blink, 6-12
Disable Cursor, 6-10
Disable Screen Save Option, 6-12
Display ESC Character, 6-16
Enable Character Blink, 6-12
Enable Cursor, 6-10
Erase Display, 6-8
Invalid Command, 6-8
Move Cursor Down, 6-14
Move Cursor Left, 6-13
Move Cursor Right, 6-13
Move Cursor to Specified Position, 6-14
Move Cursor Up, 6-13
Read Display Data String, 6-16
Read Display ID Byte, 6-15
Read Display ID String, 6-15
Reset Display, 6-8
Select Character Set n, 6-16
Set Diagnostic State, 6-9
Set Display State On, 6-9
Set Low Power State On, 6-10
Set Screen Save Blank, 6-11
Set Screen Save Walk, 6-11
Turn On Screen Save, 6-11