6-114 SLES 15 SP4 Software RAID Gold Master Image
e.
Select Yes. For nvme0n1p2, the Mount Point is now blank.
8. Edit the third partition of disk 1.
a. From the Device Overview tab, select the third partition (nvme0n1p3).
b.
Select the Edit button. The Edit Partition screen is displayed.
c. Do the following:
• From the Formatting Options,select Format device.
• From the Filesystem dropdown list, select Btrfs.
• From the Partition ID dropdown list, select Linux.
• From the Mounting Options, select Do not mount device.
To Next Page
Loading...
