Program 12 : Night Mode Setup
12-01 : Night Mode Function Setup
Level
IN
Description
Use Program 12-01 : Night Mode Function Setup to set up the Night Mode options. Refer to the fol-
lowing chart for a description of each option, its range and default setting.
Input Data
Item
No.
Item Input Data Default Description
Related Pro-
gram
Note
01 Manual Night
Mode Switching
0=Off
1=On
1 Allow/Prevent a activating
Night Service by dialing a ser-
vice code.
11-10-01
02 Automatic Night
Mode Switching
0=Off
1=On
0 According to a preset sched-
ule, enable or disable Auto-
matic Night Service for the
system.
12-02
12-03
03 Night mode
switch operating
mode
0 = Not used
1~8(Opera-
tion Mode1 - 8)
0 Use this option to set the op-
eration mode of the CPU
Night Service mode switch
sensors (external Night Mode
Selector Switch). The Night
Service mode affects trunk
inbound and outbound rout-
ing.
(V1.5 Deleted)
Even if the operation mode is changed manually, the operation mode changes according to the schedule set up.
Conditions
None
Feature Cross Reference
• Night Service
ISSUE 1.1SL1000
Program
12
Program 12 : Night Mode Setup2-78
To Next Page
Loading...
