Program 81 : Basic Hardware Setup for Trunk
81-05 : ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup
Level
MF
Description
Use Program 81-05 : ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup to define the various
basic data for layer 2 of ISDN BRI and PRI.
Input Data
Item No. Item Input Data Default Description
01 Timer T200 1 ~ 255 (100 ~ 25500 ms) 10 (1 sec) Specify the timer value in 1/100ths of a
second at the end of which transmission
of a frame may be initiated.
02 Timer T201 1 ~ 255 (100 ~ 25500 ms) 10 (1 sec) Specify the minimum time in 1/100ths of
a second between retransmissions of
the TEI Identity check messages.
03 Timer T202 1 ~ 255 (100 ~ 25500 ms) 20 (2 sec) Specify the minimum time in 1/100ths of
a second between retransmissions of
the TEI Identity check messages.
04 Timer T203 1 ~ 255 (100 ~ 25500 ms) 250 (25 sec) Specify the maximum time in 1/100ths
of a second allowed without exchanging
frames.
05 N200 1 ~ 255 3 Specify the retransmission count.
06 N201 1 ~ 65535 (Byte) 260 Specify the frame lengths in ocelots.
07 N202 1 ~ 255 3 Specify the maximum number of trans-
missions from a TEI identity request
message when the user requests a TEI.
Conditions
None
Feature Cross Reference
None
ISSUE 1.1 SL1000
Program
81
Programming Manual 2-429
To Next Page
Loading...
