Program 21 : Outgoing Call Setup
21-05 : Toll Restriction Class
Level
IN
Description
Use Program 21-05 : Toll Restriction Class to set the system Toll Restriction classes (1 ~ 15).
Input Data
Toll Restriction Class Number 1 ~ 15
Item
No.
Item Input Data Default
Related
Program
Note
01 International Call Restriction Table
This option assigns/unassigns the
International Call Restrict Table for
the Toll Restriction Class you are pro-
gramming. Enter International Call
Restrict Table data in Program 21-06-
01.
0 = Unassigned (No)
1 = Assigned (Yes)
0 21-06-01
02 International Call Permit Code
Table
This option assigns/unassigns the
International Call Permit Table for the
Toll Restriction Class you are pro-
gramming. Enter International Call
Permit Table data in Program 21-06-
02.
0 = Unassigned (No)
1 = Assigne02 d
(Yes)
0 21-06-02
04 Maximum Number of Digits Table
Assignment
Select the table (defined in 21-06-03)
to be used to determine the maxi-
mum number of digits allowed for
outgoing calls.
1~4=Table
0 = Disable (None)
0 21-06-03
05 Common Permit Code Table
It chooses whether the table set up
by 21-06-04 is referred to, or not re-
ferred to.
0 = Unassigned (No)
1 = Assigned (Yes)
0 21-06-04
06 Common Restriction Table
It chooses whether the table set up
by 21-06-05 is referred to, or not re-
ferred to.
0 = Unassigned (No)
1 = Assigned (Yes)
0 21-06-05
07 Permit Code Table
Setthetables1~4when referring to
the table set up by 21-06-06.
1~4=Table
0 = Disable (None)
0 21-06-06
08 Restriction Table
Setthetables1~4when referring to
the table set up by 21-06-07.
1~4=Table
0 = Disable (None)
0 21-06-07
09 Restriction for Common Speed
Dials
Use this option to enable/disable Toll
Restriction for Common Speed Dial-
ing numbers. If enabled, System
Speed Dialing numbers have the
same restrictions as manually dialed
numbers.
0 = Does Not Restrict
1 = Following Re-
striction Check
0
10 Restriction for Group Speed Dials
Use this option to enable/disable Toll
Restriction for Group Speed Dialing
numbers. If enabled, Group Speed
Dialing numbers have the same re-
strictions as manually dialed num-
bers.
0 = Does Not Restrict
1 = Following Re-
striction Check
0
ISSUE 1.1 SL1000
Program
21
Programming Manual 2-217
To Next Page
Loading...
