Program 44 : ARS/F-Route Setup
44-07 : Gain Table for ARS/F-Route Access
Level
IN
Description
Use Program 44-07 : Gain Table for ARS/F-Route Access to set the gain/PAD table. If an extension
dials ARS/F-Route number:
• The Extension Dial Gain Table, assigned in Program 44-05, is activated.
• The Extension Dial Gain Table follows Outgoing transmit and Outgoing receive settings.
If the incoming call is transferred to another line using ARS/F-Route:
• The Tandem Gain Table, assigned in Program 44-05, is activated.
• The Tandem Gain Table follows the Incoming transmit and Incoming receive settings for incoming
line, and Outgoing transmit and Outgoing receive settings for the outgoing line.
For ARS/F-Route calls, the CODEC gains defined in Programs 14-01-02 and 14-01-03 are not activated.
Input Data
Gain Table Number 001 ~ 100
Item No. Item Input Data Default
01 Incoming Transmit 1~63
(- 15.5 dB ~ + 15.5 dB)
32 (0 dB)
02 Incoming Receive 1~63
(- 15.5 dB ~ + 15.5 dB)
32 (0 dB)
03 Outgoing Transmit 1~63
(- 15.5 dB ~ + 15.5 dB)
32 (0 dB)
04 Outgoing Receive 1~63
(- 15.5 dB ~ + 15.5 dB)
32 (0 dB)
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
ISSUE 1.1SL1000
Program
44
Program 44 : ARS/F-Route Setup2-360
To Next Page
Loading...
