Program 20 : System Option Setup
20-02 : System Options for Multiline Telephones
Level
IN
Description
Use Program 20-02 : System Options for Multiline Telephones to set various system options for
multiline telephones.
Input Data
Item
No.
Item Input Data Default
Related
Program
Note
01 Trunk Loop Key Opera-
tion Mode
0 = Keep Lamp
1 = Extinction
0
Mode
0 = Keep Lamp 1 = LED Off
Incoming : 300 IPM Red blink
Talking : Green Lighting
(on Talking TEL)
LED Off
Holding : 60 IPM Green
blink (on holding
TEL)
LED Off
02 Trunk Group Access Key
Operating Mode
Use this option to set the
operating mode of the ex-
tension trunk group keys.
The keys are for incoming
access, outgoing access,
or both.
0 = Outgoing / Incoming
1 = Outgoing
2 = Incoming
0
04 Retrieve the Line After
Transfer
Enable (1) or disable (0)
an extension ability to an-
sweracallafterithas
been transferred, but be-
fore it is answered.
0 = Not Holding (No Keep)
1 = Holding (Keep)
0
05 Headset Busy Mode
Set the conditions under
which a headset extension
is busy to incoming call-
ers.
0 = No (Disable)
1 = Yes (Enable)
0 20-09-07
06 Pre-selection Time
When a multiline terminal
user preselects a line key,
the system remembers the
pre-selection for this time.
0 ~ 64800 seconds 5
07 Time and Date Display
Mode
Set how the Time and
Date appear on display
telephones. There are
eight display modes.
1~10
Type1=(12hour) TUE 103:15PM
Type2=(12hour) 3-10 TUE3:15
Type3=(12hour) 10-3 TUE3:15
Type4=(12hour) MAR 10 TUE3:15
Type5=(24hour) TUE 10 3 15 : 15
Type6=(24hour) 3-10 TUE 15 : 15
Type7=(24hour) 10-3 TUE 15 : 15
Type8=(24hour) MAR 10 TUE 15 : 15
Type9=(12hour) 10 MAR TUE3:15
Type 10 = (24 hour) 10 MAR TUE 15 : 15
1
08 LCD Display Holding
Time
0 ~ 64800 seconds 5
ISSUE 1.1 SL1000
Program
20
Programming Manual 2-151
To Next Page
Loading...
