NEC SL100 - Traffic Report Data Setup

Program 90 : Maintenance Program
90-20 : Traffic Report Data Setup
Level
IN
Description
Use Program 90-20 : Traffic Report Data Setup to define the details of the traffic report.
Input Data
Item No. Item Input Data Default
01 Call Traffic Output 0 = Not Measured
1 = Measure
0
03 All Line Busy Output 0 = Not Detected
1 ~ 256
(Report when the data reaches the defined
value)
0
04 DTMF Receiver Busy Output 0 = Not Detected
1 ~ 256
(Report when the data reaches the defined
value)
0
05 Dial Tone Detector Busy Output 0 = Not Detected
1 ~ 256
(Report when the data reaches the defined
value)
0
06 Caller ID Receiver Busy Output 0 = Not Detected
1 ~ 256
(Report when the data reaches the defined
value)
0
07 Voice Mail Channel All Busy Output 0 = Not Detected
1 ~ 256
(Report when the data reaches the defined
value)
0
09 Attendant Channel All Busy Output 0 = Not Detected
1 ~ 256
(Report when the data reaches the defined
value)
0
11 Security Sensor Dial Record
Record Security sensor dialing and Re-
mote Inspection dialing to security report
0 = Not Recorded
1 = Recorded
1
Conditions
None
Feature Cross Reference
• Traffic Reports
ISSUE 1.1SL1000
Program
90
Program 90 : Maintenance Program2-510