NEC SL100 - Table 2-3 Function Number List

Func-
tion
Number
Function
Additional
Data
LED Indication Note
85 Directory Dialing
86 Private Call Refuse None Off : Cancel
Slow Blink (Red) : Set
87 Caller ID Refuse None Off : Cancel
Slow Blink (Red) : Set
88 Dial-In Mode
Switching
Program 22-17
Table No.
(1 ~ 100)
Off : Pattern1,Pattern5~8
On (Red) : Pattern 2
Slow Blink (Red) : Pattern 3
Fast Blink (Red) : Pattern 4
94 Call Attendant Fast Blink (Red) : Setup - No answer calls
Slow Blink (Red) : Setup - Busy calls
On (Red) : Setup - Busy/No answer calls
97 Door Box Access
Key
Door Box Number
(1-8)
On (Red) : Doorphone Busy
Off : Doorphone Idle
Fast Blink (Red) : Doorphone Incoming
#02 -- Cutting the tele-
phone power --
Package Number
(2-16)
On (Red) : Set
Off : Cancel
#03 -- Remote Monitor
Permit --
Slow Blink (Red) : Remote Monitor Permit
Off : Remote Monitor Deny
Table 2-3 Function Number List
[2] Appearance Function Level (
*
00 ~
*
99) (Service Code 852 )
Func-
tion
Number
Function
Additional
Data
LED Indication Note
*
00 ICM Key None
*
01 Trunk Key Trunk Number
(001 ~ 126)
Fast Blink (Green) : Incoming(own)/
Transferring(own)/Recall(own)
Fast Blink (Red) : Incoming(other)
(125msec:on / 125msec:off / 125msec:on /
625msec:off) (Green) : Speaking(own)
On (Red) : Speaking(other)/Transferring(other)
Slow Blink (Green) : Holding(own)
Slow Blink (Red) : Holding(other)/Recall(other)
*
02 Trunk Group Trunk Group
Number (001 ~
025)
Fast Blink (Red) : Incoming (own/other)
*
03 Virtual Extension
Key
Extension Num-
ber or Department
Group Number
Fast Blink (Green) : Transferring(own)/Recall(own)
Fast Blink (Red) : Incoming(own/other)
(125msec:on / 125msec:off / 125msec:on /
625msec:off) (Green) : Speaking(own)
On (Red) : Speaking(other)/Transferring(other)
Slow Blink (Green) : Holding(own)
Slow Blink (Red) : Holding(other)/Recall(other)
*
04 Park Key Park Number (01
~ 64)
Slow Blink (Green) : Holding(own)
Fast Blink (Green) : Recall(own)
Slow Blink (Red) : Holding(other)/Recall(other)
*
05 Loop Keys
Use Programs 15-
13-01 and/or 15-
13-02 to assign the
loop key to a trunk
group.
0 = Incoming
1 = Outgoing
2 = Both
None
*
07 Station Park Hold None Slow Blink (Green) : Holding(own)
Fast Blink (Green) : Recall(own)
ISSUE 1.1 SL1000
Program
15
Programming Manual 2-133