Program 11 : System Numbering
11-10 : Service Code Setup (for System Administrator)
Level
IN
Description
Use Program 11-10 : Service Code Setup (for System Administrator) to customize the Service
Codes for the System Administrator. You can customize additional Service Codes in Programs 11-11 ~
11-16. The following chart shows:
• The number of each code (01 ~ 50).
• The function of the Service Code.
• The type of telephones that can use the Service Code.
• The default entry. For example, dialing item 26 allows users to force a trunk line to disconnect.
Input Data
Item No. Item Terminals Default
Related Pro-
gram
Note
01 Night Mode Switching MLT, SLT 818 12-xx
20-07-01
02 Change of music on hold
tone
MLT 881 10-04
03 Setting the System Time MLT 828
04 Storing Common Speed Di-
aling Numbers
MLT 853
05 Storing Group Speed Dial-
ing Numbers
MLT 854
06 Setting the Automatic Trans-
fer for Each Trunk Line
MLT 833 24-04-01
07 Canceling the Automatic
Transfer for Each Trunk Line
MLT 834 24-04-01
08 Setting the Destination for
Automatic Trunk Transfer
MLT 835 24-04-01
09 Charging Cost Display by
the Supervisor
MLT 771
11 Entry Credit for Toll Restric-
tion
MLT 774
12 Night Mode Switching for
Other Group
MLT 718 12-xx
20-07-01
16 Leaving Message Waiting
(Requires CPU to be li-
censed for Hotel/Motel)
MLT 726 11-11-09
17 Dial Block by Supervisor MLT 701 90-19
18 Off-Premise Call Forward by
Door Box
MLT 822 13-05
20 VRS - Record/Erase Mes-
sage
Define Service Code for VRS
message recording or erasing.
MLT, SLT 716 20-07-13
21 VRS - General Message
Playback
MLT, SLT 711 20-07-14
22 VRS - Record or Erase Gen-
eral Message
MLT, SLT 712 20-07-15
ISSUE 1.1 SL1000
Program
11
Programming Manual 2-63
To Next Page
Loading...
