Program 14 : Trunk, Basic Setup
14-11 : ID Setup for IP Trunk
Level
IN
Description
Use Program 14-11 : ID Setup for IP Trunk to set the ID of each IP Trunk. This program refers to in-
coming and outgoing IP Trunk calls. The ID is sent on an outgoing IP Trunk call. This program is used
only for H.323.
Input Data
Trunk Port Number 001 ~ 126
Item No. Item Input Data Default
01 IP Trunk ID 0 ~ 65535
(0=Nosetting)
0
Conditions
• This Data is referred to at IP trunk outgoing call, or IP trunk incoming call.
• This ID is notified at IP trunk outgoing call.
• It is not notified when ID is 0.
• Incoming Call arrives to the trunk port of the same ID as ID notified from the partner system.
Feature Cross Reference
None
ISSUE 1.1SL1000
Program
14
Program 14 : Trunk, Basic Setup2-110
To Next Page
Loading...
