NEC SL100 - Short Ring Setup; Table 2-13 Frequency 1;2 Table; Table 2-14 Ring Cycle Table

Program 80 : Basic Hardware Setup for System
80-09 : Short Ring Setup
Level
IN
(This Program is available for V1.5)
Description
Use Program 80-09 : Short Ring Setup to define the short ring tone for SL1000 multiline terminals.
Input Data
Short Ring Number 01 ~ 32
Item No. Item Description Default
01 Frequency 1 Refer to Table 2-13 Frequency 1/2 Table on this page. 00=Nosetting,01~15
02 Frequency 2 Refer to
Table 2-13 Frequency 1/2 Table on this page. 00=Nosetting,01~15
03 Ring Cycle Refer to
Table 2-14 Ring Cycle Table on this page. 00=Nosetting,01~14
When a single tone is sent, Frequency 1/2 is set to the same value.
Table 2-13 Frequency 1/2 Table
Data Frequency (Hz)
01 392
02 440
03 494
04 523
05 587
06 659
07 698
08 784
09 880
10 988
11 1046
12 1175
13 1318
14 1397
15 1568
Table 2-14 Ring Cycle Table
Data Ring Cycle (ms)
01 125 (On) / Off
ISSUE 1.1 SL1000
Program
80
Programming Manual 2-421