Program 15 : Extension, Basic Setup
15-07 : Programmable Function Keys
Level
SA
Description
Use Program 15-07 : Programmable Function Keys to assign functions to a multiline terminal line
keys.
For certain functions, you can append data to the key basic function. For example, the function 26 ap-
pended by data 1 makes a Group Call Pickup key for Pickup Group 1. You can also program Function
Keys using Service Codes.
To clear any previously programmed key, press 000 to erase any displayed code.
Input Data
Extension Number Maximum four digits
Default Settings
Line Key Function Number Additional Data
LK01
*
01 (Trunk Line Key) 1
:: :
LK12
*
01 (Trunk Line Key) 12
LK13 0 (No setting) 0
:: :
LK24 0 (No setting) 0
Item No.
Line Key Num-
ber
Function Number Additional Data
01 1 ~ 24 0 ~ 99, #0 ~ #99
(Normal Function Code) (Service Code 851 by default)
*
00 ~
*
99
(Appearance Function Code) (Service Code 852 by de-
fault)
Refer to
Table 2-2 Function
Number List on the next
page
.
ISSUE 1.1 SL1000
Program
15
Programming Manual 2-129
To Next Page
Loading...
