NEC SL100 - Trunk Ring Tone Range; Table 2-5 Program 22-03 - Incoming Signal Frequency Patterns

Program 22 : Incoming Call Setup
22-03 : Trunk Ring Tone Range
Level
IN
Description
Use Program 22-03 : Trunk Ring Tone Range to select the ring tone range for the trunk. The trunk
uses a ring tone in the range selected when it rings an extension. Eight ring tones are available. Cus-
tomize the Trunk Ring Tones in Program 82-01.
Input Data
Trunk Port Number 001 ~ 126
Item No. Ring Tone Pattern Default Description Related Program
01 0= Ring Tone Pattern 1 (1)
1= Ring Tone Pattern 2 (2)
2= Ring Tone Pattern 3 (3)
3= Ring Tone Pattern 4 (1)
4= Ring Tone Pattern 5(2)
5= Ring Tone Pattern 6(3)
6= Ring Tone Pattern 7(3)
7= Not Used
8= Not Used
0 Use this program to se-
lect the ring tone range
for the trunk. The trunk
usesaringtoneinthe
range selected when it
rings an extension. Eight
ring tones are available.
15-02
Table 2-5 Program 22-03 - Incoming Signal Frequency Patterns
Incoming Signal Frequency Pattern Tone Type
Pattern 1 600/450/16 Hz FM
Pattern 2 450/16 Hz AM
Pattern 3 600 Hz
Pattern 4 1100/1400/16 Hz FM
Pattern 5 660/760/16 Hz FM
Pattern 6 1100/1400/8 Hz FM
Pattern 7 660/760/8 Hz FM
Conditions
None
Feature Cross Reference
• Selectable Ring Tones
ISSUE 1.1SL1000
Program
22
Program 22 : Incoming Call Setup2-240