Program 10 : System Configuration Setup
10-03 : ETU Setup
Level
IN
Description
Use Program 10-03 : ETU Setup to setup and confirm the Basic Configuration data for each unit.
When changing a defined terminal type, first set the type to 0 and then plug the new device in to have
the system automatically define it or you may have to reseat the unit.
The items highlighted in gray are read only and cannot be changed.
Input Data
For HBI PKG Setup
Physical Port Number 01 ~ 08
Item No. Item Input Data Default
01 Terminal Type
0 = No setting
1 = Multi-Line Telephone
2=SLT
8 = Door Phone
10 = DSS Console
3 ~ 7, 9, 11, 12 = Not Used
2
02 Logical Port Number 1 ~ 128
03 Transmit Gain level for SLT
1~63
(- 15.5 ~ + 15.5dB)
32
04 Receive Gain level for SLT
1~63
(- 15.5 ~ + 15.5dB)
32
05 Select port type
0 = Hybrid Port
1 = Door Phone
0
06 Multi-Line Telephone Line
0 = None
1=12Line
2=24Line
For COIU Unit Setup
Physical Port Number 1 ~ 4
Item No. Item Input Data Default Note
01 Logical Port Number 1~48 0
02 Select port type
0 = Trunk
1 = Audio Port
0
For BRIU PKG Setup
ISDN Line Number 01 ~ 02
Item No. Item Input Data Default Note
01 ISDN Line Mode 0 = No setting
1 = T-Point
2 = S-Point
3 ~ 5= Not Used
6 = S-Point (Leased Line)
1
ISSUE 1.1 SL1000
Program
10
Programming Manual 2-5
To Next Page
Loading...
