Guide to Feature Programming
Program
Number
Program Name Default Note
10-03-XX ETU Setup Refer to Programming Manual.
11-11-13 Service Code Setup (for Setup/Entry Operation)
- Display Language Selection for Multiline Ter-
minal
778
11-12-30 Service Code Setup (for Service Access) -
Specified Trunk Answer
772
11-12-43 Service Code Setup (for Service Access) - Uni-
versal Answer
#9
14-01-02 Basic Trunk Data Setup - Transmit Level 32 (0dB)
14-01-03 Basic Trunk Data Setup - Receive Level 32 (0dB)
14-02-02 Analog Trunk Data Setup - Ring Detect Type 0
14-05-01 Trunk Group - Trunk Group Number Trunk Port 1~126 = Priority 1~126
(SL1000)
Trunk Port 1~96 = Priority 1~96
(SL1100)
14-06-01 Trunk Group Routing - Priority Order Number Route 1, Order Number 1 = 1
(Trunk Group 1)
Order Numbers 2, 3, 4 = 0 (Not
Specified)
All Other Routes (2~25) and Order
Numbers (1~4) = 0 (Not Specified).
14-07-01 Trunk Access Map Setup Access Map 1 = Trunk Ports 1~126
assigned with option 7 access (in-
coming and outgoing access and
access when trunk is on Hold).
(SL1000)
Access Map 2~126 = Trunk Ports
1~126 assigned with option 0 ac-
cess (No access). (SL1000)
Access Map 1 = Trunk Ports 1~96
assigned with option 7 access (in-
coming and outgoing access and
access when trunk is on Hold).
(SL1100)
Access Map 2~96 = Trunk Ports
1~96 assigned with option 0 access
(No access). (SL1100)
15-01-05 Basic Extension Data Setup - Restriction for
Outgoing Disable on Incoming Line
0
15-02-01 Multiline Telephone Basic Data Setup - Display
Language Selection (To select options 8~10,
press either 8 or Flash, then press line keys
1~3. Key 1 is option 8, Key 2 is option 9, and
Key 3 is option 10.)
1
15-02-02 Multiline Telephone Basic Data Setup - Trunk
Ring Tone
2
15-02-22 Multiline Telephone Basic Data Setup - Multiple
Incoming From Intercom and Trunk
1
15-03-03 Single Line Telephone Basic Data Setup - Ter-
minal Type
0
15-06-01 Trunk Access Map for Extensions 1
15-07-01 Programmable Function Keys Refer to Programming Manual.
15-13-01 Loop Keys - Outgoing Option 0: Programming Function Key No.
= 01-24
SL1000/SL1100 ISSUE 2.0
1-124
Central Office Calls, Answering
C
To Next Page
Loading...
