NEC SL1000 - Page 135

Program
Number
Program Name Default Note
15-13-02 Loop Keys - Incoming Option 0: Programming Function Key No.
= 01-24
20-02-09 System Options for Multiline Telephones - Dis-
connect Supervision
1
20-02-15 System Options for Multiline Telephones - Call-
er ID Display Mode
0
20-06-01 Class of Service for Extensions All extension port = Class 1
20-10-07 Class of Service Options (Answer Service) - Au-
tomatic Off-Hook Answer
COS 01~15 = 1
20-13-13 Class of Service Options (Supplementary Serv-
ice) - Continued Dialing (DTMF) Signal on ICM
Call
COS 01~15 = 1
20-13-23 Class of Service Options (Supplementary Serv-
ice) - Display the Reason for Transfer
COS 01~15 = 0
21-01-15 System Options for Outgoing Calls - Outgoing
Disable on Incoming Line (Toll Restriction)
0
21-01-16 System Options for Outgoing Calls - Supervise
Dial Detection Timer
20 (seconds)
21-01-17 System Options for Outgoing Calls - Restriction
Digit in Outgoing Disable on Incoming Line
4
22-01-01 System Options for Incoming Calls - Incoming
Call Priority
1
22-01-02 System Options for Incoming Calls - Incoming
Call Ring No Answer Alarm
0
22-01-03 System Options for Incoming Calls - Ring No
Answer Alarm Time
60 (seconds)
22-01-04 System Options for Incoming Calls - DIL No An-
swer Recall Time
0 (seconds)
22-02-01 Incoming Call Trunk Setup 0
22-03-01 Trunk Ring Tone Range - Ring Tone Pattern 0
22-04-01 Incoming Extension Ring Group Assignment Extension 200 (first port)
22-05-01 Incoming Trunk Ring Group Assignment 1
22-06-01 Normal Incoming Ring Mode 1
22-07-01 DIL Assignment not assigned
22-08-01 DIL/IRG No Answer Destination 0
82-08-01
(MF Level)
Sidetone Volume Setup 6 (SL1100)
Operation
To answer an incoming trunk call:
1. Lift the handset.
To use Universal Answer to answer a call ringing over the Paging system:
1. Go off-hook.
Depending on system programming, this may answer the call and you can skip step 2.
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-125
C