EasyManua.ls Logo

NEC SL1000 - Navigation Key Operations; Check Dialed Numbers; Search Speed Dial and Call

NEC SL1000
814 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program
Number
Program Name Default Note
13-01-03 Speed Dialing Option Setup - Number of Common
Speed Dialing Bins
900
13-02-01 Group Speed Dialing Bins not assigned
13-03-01 Speed Dialing Group Assignment for Extensions 1
13-04-01 Speed Dialing Number and Name - Speed Dialing
Data
not assigned
13-04-02 Speed Dialing Number and Name - Name not assigned
13-04-03 Speed Dialing Number and Name - Transfer Mode 0
13-04-04 Speed Dialing Number and Name - Transfer Desti-
nation Number
not assigned
13-04-05 Speed Dialing Number and Name - Incoming Ring
Pattern
0
13-05-01 Speed Dialing Trunk Group - Trunk Group Num-
ber
not assigned
13-06-01 Speed Dialing Data and Name not assigned
14-02-06 Analog Trunk Data Setup - Pause at 1st digit after
Line Seize in Manual Dial Mode
1
15-02-04 Multiline Telephone Basic Data setup - Redial
(Speed Dial) Control
0
15-07-01 Programmable Function Keys Refer to Programming Manual.
15-14-01 Programmable One-Touch Keys - Station Speed
Dial Data
not assigned (SL1100)
15-14-02 Programmable One-Touch Keys - Station Speed
Dial Name
not assigned (SL1100)
20-06-01 Class of Service for Extensions All extension port = Class 1
20-07-04 Class of Service Options (Administrator Level) -
Storing Speed Dialing Entries
COS 01~15 = 1
20-08-03 COS Options (Outgoing Call Service) - System
Speed Dialing
COS 01~15 = 1
20-08-04 COS Options (Outgoing Call Service) - Group
Speed Dialing
COS 01~15 = 1
30-03-01 DSS Console Key Assignment The DSS keys 001~060 of all DSS
consoles = DSS/One-Touch key
200~259
The DSS keys 061~114 of all DSS
consoles = No Setting (SL1100)
80-03-01 DTMF Tone Receiver Setup - Detect Level Type 1~5 = 0
80-03-02 DTMF Tone Receiver Setup - Start delay time Type 1~5 = 0
80-03-03 DTMF Tone Receiver Setup - Min. detect level Type 1 = 10 (-20dBm)
Type 2 = 15 (-25dBm)
Type 3 = 10 (-20dBm)
Type 4 = 10 (-20dBm)
Type 5 = 10 (-20dBm)
80-03-04 DTMF Tone Receiver Setup - Max. detect level 2 (-2dBm)
80-03-05 DTMF Tone Receiver Setup - Forward twist level 5 (6dBm)
80-03-06 DTMF Tone Receiver Setup - Backward twist level Type 1 ~ 5 = 0 (1dBm)
80-03-07 DTMF Tone Receiver Setup - ON detect time Type 1~5 = 1 (30ms)
80-03-08 DTMF Tone Receiver Setup - OFF detect time Type 1~5 = 1 (30ms)
SL1000/SL1100 ISSUE 2.0
1-6
Abbreviated Dialing/Speed Dial
A

Table of Contents

Other manuals for NEC SL1000

Related product manuals