NEC SL1000 - InMail - Sending Calls to Mailbox; Forward All Calls to Mailbox; Forward Calls When Busy; Forward Calls When No Answer

2. Dial #7 (default Service Code).
- OR -
Press the System Speed Dialing key (Service Code 851: 27).
To preselect, press a line key in step 1 (instead of Speaker).
3. Dial the Station Speed Dial buffer number (0~9).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
:
:
0 = Station Speed Dial buffer 10
The stored number dials out.
Unless selected by the user, Trunk Group Routing selects the trunk for the call. The system may
optionally select a specific Trunk Group for the call.
If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.
To dial a Station Speed Dialing number (Single Line Terminal):
1. Lift the Handset.
2. Station Speed Dial #7
Group Speed Dial #4
System Speed Dial #2
3. Dial the Speed Dial Memory Location.
Station Speed Dial 0~9
Group Speed Dial xxx (none at default)
System Speed Dial 000~999
4. Converse.
SL1000/SL1100 ISSUE 2.0
1-12
Abbreviated Dialing/Speed Dial
A