NEC SL1000 - Page 238

• PRG 15-08 is only effective for Virtual Extensions appearing on a station when the station is set for
patterns 1~3 in PRG 15-02-02. When PRG 15-02-02 for the station is set to patterns 4~8, PRG
15-08 for Virtual Extensions is not used.
Default Settings
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Single Line Terminals
Guide to Feature Programming
Program
Number
Program Name Default Note
15-02-02 Multiline Telephone Basic Data Setup
- Trunk Ring Tone
2
15-02-03 Multiline Telephone Basic Data Setup
- Extension Ring Tone
5
15-02-35 Multiline Telephone Basic Data Setup
- Message Waiting Lamp Cycle for
Calling Extension
7 (SL1100)
15-02-36 Multiline Telephone Basic Data Setup
- Message Waiting Lamp Cycle for
Called Extension
3 (SL1100)
15-02-37 Multiline Telephone Basic Data Setup
- Voice Mail Message Wait Lamp Col-
or
1 (SL1100)
15-02-38 Multiline Telephone Basic Data Setup
- Voice Mail Message Wait Lamp Cy-
cle
3 (SL1100)
15-08-01 Incoming Virtual Extension Ring
Tone Setup
0 (Tone Pattern 1)
15-10-01 Incoming Virtual Extension Ring
Tone Order Setup
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
20-13-49 Class of Service Options (Supple-
mentary Service) - BLF Indication on
CO Incoming State
COS 01~15 = 0
SL1000/SL1100 ISSUE 2.0
1-228
Distinctive Ringing, Tones and Flash Patterns
D