NEC SL1000 - Page 239

Program
Number
Program Name Default Note
20-15-01 Ring Cycle Setup - Normal Incoming
Call on Trunk
3
20-15-02 Ring Cycle Setup - PBX, CES Incom-
ing Call
8
20-15-03 Ring Cycle Setup - Incoming Internal
Call
8
20-15-04 Ring Cycle Setup - DID/DISA/VRS 8
20-15-05 Ring Cycle Setup - DID/DDI 8
20-15-06 Ring Cycle Setup - Dial-In 8
20-15-07 Ring Cycle Setup - Door Box Ringing
for SLT
2
20-15-08 Ring Cycle Setup - Virtual Extension
Ring
8
20-15-09 Ring Cycle Setup - Callback 4
20-15-10 Ring Cycle Setup - Alarm for SLT 5
20-15-11 Ring Cycle Setup - VRS Waiting Mes-
sage Incoming Call
6
22-03-01 Trunk Ring Tone Range 0
80-01-01 Service Tone Setup - Repeat Count 0~255 (0 = Endless)
80-01-02 (06) Service Tone Setup - Basic Tone
Number
0~33
(0 = No Tone)
(33 = Default Time Slot)
80-01-02 (14) Service Tone Setup - Basic Tone
Number
Refer to Programming Manual.
80-01-02 (39) Service Tone Setup - Basic Tone
Number
Refer to Programming Manual.
Table 1-19 Basic Tone Table - Tone 06
Tone 06
Unit Basic Tone Duration Gain Level
1 1 - 420Hz, -13dB 500ms 42
2 0 - No Tone 500ms 42
3 0 - No Tone 0ms
4 0 - No Tone 0ms
5 0 - No Tone 0ms
6 0 - No Tone 0ms
7 0 - No Tone 0ms
8 0 - No Tone 0ms
Table 1-20 Basic Tone Table - Tone 14
Tone 14
Unit Basic Tone Duration Gain Level
1 1 - 420Hz, -13dB 1000ms 42
2 0 - No Tone 4000ms 42
3 0 - No Tone 0ms
4 0 - No Tone 0ms
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-229
D