NEC SL1000 - Page 249

• If the terminal has Call Forward Both set and then enters power cutting mode, any calls directed to
the terminal will not follow the call forward settings.
• Caller ID history is not updated for a phone which is in power cutting mode from the ecology feature.
Once power is restored to the phone the caller ID history will start functioning again.
• If the system cuts the power via the ecology feature while a user is on a call, the call will not be lost.
If the user places the caller on hold or park, the user's phone will then switch to power cutting mode
and the call will be lost.
If power cutting set “on” manually during scheduled power cutting “off” state, power cutting “on” state
continues until next power cutting “off” time.
The system does not start the cutting telephone power until next schedule.
Time schedule
Operation
0:00 6:00 19:00 19:000:00 0:006:00
0:00 6:00 19:00 19:000:00
Cancel the cutting telephone power by manual operation.
Power “off” state
Power “on” state
0:006:00
Figure 1-15 Time Schedule 1
Vice versa if power cutting is set “off” manually during scheduled power cutting “on” state, power
cutting “off” state continues to next power cutting “on” time.
The system does not start the power supply until next schedule.
Set the cutting telephone power by manual operation.
Power “off” state
Power “on” state
Time schedule
Operation
0:00 6:00 19:00 19:000:00 0:006:00
0:00 6:00 19:00 19:000:00 0:006:00
Figure 1-16 Time Schedule 2
• During power cutting “off” state,
- Outgoing calls can not be made.
- Incoming calls receive a busy tone.
- Call forward features work at the forward set terminal.
- Disables Both Ring CFW / Follow Me.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-239
E