NEC SL1000 - Page 250

Power saving mode (SL1100)
• The system activates power saving mode when the Multiline Terminal is idle or no incoming calls
are received during the programmed time period. This darkens the brightness of all Line Key and
feature key LED's on the Multiline Terminal. This feature does not affect the display of the terminal.
• Power saving mode can be set for each terminal individually.
• Any key operation or incoming call at the terminal ends the power saving mode and all LEDs return
to normal brightness.
Default Settings
None
System Availability
Terminals
All Multiline Terminals and Single Line Terminals (SL1000)
All Multiline Terminals (SL1100)
Required Component(s)
408M-A1 (Expansion KSU), 408E-A1, 008E-A1 (SL1000)
084M-B1 (Expansion KSU), 080E-B1 (SL1100)
Related Features
Night Service
Guide to Feature Programming
Program Number Program Name Default
15-02-18 Power saving Mode 1
20-02-10 Timer for Power saving mode 0
20-42-01 Ecology Mode group No. 1
20-43-01 Ecology Mode 1
15-07 Programmable Function Key Refer to Programming Manual
11-10-44 Cutting the telephone power 831
SL1000/SL1100 ISSUE 2.0
1-240
Ecology
E